Chain Link Fence Calculator
Fabric, posts and rail needed for chain link.
Enter your values
ⓘ Live results
Results
- Line posts
- 16
- Terminal/corner/gate posts
- 6
- Fabric needed
- 200 ft (rolls sold in 50 ft)
- Top rail needed
- 200 ft (in 10.5 ft sections)
Quick answer
Chain link fence needs one terminal post per run/corner/gate and line posts spaced about every 10 feet.
line posts = ceil(length / spacing) - 1
How to use the Chain Link Fence Calculator
- 1Measure the total fence length and count corners, ends and gate openings.
- 2Choose a line post spacing, typically 8-10 feet.
- 3Order fabric and top rail in the standard roll and section lengths shown.
Worked example
Using the values the calculator loads with:
Inputs
- Fence length200 ft
- Line post spacing10 ft
- Corner/end posts4
- Gates1
Results
- Line posts16
- Terminal/corner/gate posts6
- Fabric needed200 ft (rolls sold in 50 ft)
- Top rail needed200 ft (in 10.5 ft sections)
Frequently asked questions
How deep should posts be set?
Typically one third of the post's above-ground height, set in concrete.
Do gate posts need to be bigger?
Yes, gate posts usually need a larger diameter post set deeper than line posts.
About this calculator
- Built and reviewed by James Whitfield · How we build and test calculators
- Report an error
Results are estimates for general information. For medical, legal, structural or financial decisions, confirm with a qualified professional.